Four steps. No mains wiring. No ceiling cavity gymnastics. Here's exactly what installing your kit looks like.
Everything arrives in one box: your alarms (already paired), mounting brackets, screws, the bonus remote, and your Australian Compliance Certificate.
Each alarm arrives factory-sealed with a 10-year lithium battery already installed. There’s nothing to charge, connect, or configure before you start.
Bundle packs ship pre-paired, so you can skip straight to verification. Press the test button on any alarm — every other alarm in the bundle should sound within a few seconds.
If you ever need to re-pair (after replacing one), the alarms link via dedicated radio frequency in about thirty seconds on a kitchen table. No roof access, no wiring, no app.
Position one alarm in every bedroom, in hallways connecting bedrooms, and on every level. Screw the mounting bracket to the ceiling (two screws), then twist the alarm onto the bracket.
You need a screwdriver and a step ladder. That’s it. Each alarm takes about three to five minutes to mount. A four-alarm home is typically done in twenty minutes.
Press the test button on any alarm — or use the bonus remote. If every alarm in the house sounds, you’re compliant. Keep your Australian Compliance Certificate somewhere safe as your record.
We recommend testing your alarms monthly — just press the button. The sealed battery lasts ten years with no maintenance required.
A screwdriver
Phillips head
A step ladder
For ceiling access
20–30 minutes
For a typical home
No electrician
No licence required
That's the trade-off. A few minutes of your weekend instead of a four-week wait, a four-figure quote, and a sparky in your roof.
Get my kit